Exfo PM-1100 Optical Power Meter Manual de usuario descargar pdf (Pagina 75)

Optical Power Meter 65

A Technical Specifications

IMPORTANT

The following technical specifications can change without notice.

The information presented in this section is provided as a reference

only. To obtain this product’s most recent technical specifications,

visit the EXFO Web site at www.exfo.com.

SPECIFICATIONS

MODEL PM-1102X PM-1613/1623 PM-1613W/1623W

Number of detectors 1 1/2 1/2

Detector type GeX InGaAs InGaAs

Detector size (mm) 2 1 3

Wavelength range (nm) 750 to 1700 800 to 1700 800 to 1700

Power range (dBm) 20 to –75

9 to –80

8 to –70

Uncertainty (%) ±5

±5

(10 dBm to –35 dBm) (0 dBm to –55 dBm) (0 dBm to –50 dBm)

Linearity

(dB) ±0.015 ±0.015 ±0.015

(0 dBm to –35 dBm) (0 dBm to –55 dBm) (0 dBm to –50 dBm)

Noise (peak-to-peak)

(pW) — 3 20

Power resolution

(dB) 0.001 (20 dBm to –35 dBm) 0.001 (9 dBm to –40 dBm) 0.001 (8 dBm to –40 dBm)

Wavelength resolution (nm) 1 0.01 0.01

Stabilization time (ms)

automatic range 12 (9 dBm to –80 dBm) 6 (8 dBm to –70 dBm)

automatic range 3 (9 dBm to –49 dBm) 3 (8 dBm to –49 dBm)

fixed range (1 to 4) 1 1

Sampling rate (sample/s/channel)

fast acquisition mode up to 4096 up to 4096

continuous measurement mode up to 40 up to 256 up to 256

Fiber type (μm) 5/125 to 62.5/125 5/125 to 62.5/125 5/125 to 62.5/125

Analog output

bandwidth

(Hz) (ranges 1 to 6) N/A 700 k; 700 k; 30 k; 30 k; 50 k; 7.5 k; 5 k; 7 k;

150; 150 (typical) 1 k; 1 k (typical)

output voltage (V) between 0 and 2.15 (typical) between 0 and 2.15 (typical)

output impedance (Ω) 640 (typical) 640 (typical)

External trigger input voltage (V) N/A 0 to 5 (TTL) 0 to 5 (TTL)

General Specifications

Size (H x W x D) 11.7 cm x 22.2 cm x 33.3 cm (4

/8 in x 8

/4 in x 13

/8 in)

Weight 2.0 kg (4.5 lb) 2.8 kg (6.2 lb) 2.8 kg (6.2 lb)

Temperature operating 0 °C to 40 °C (32 °F to 104 °F) 0 °C to 40 °C (32 °F to 104 °F) 0 °C to 40 °C (32 °F to 104 °F)

storage –40 °C to 70 °C (–40 °F to 158 °F) –35 °C to 70 °C (–31 °F to 158 °F) –35 °C to 70 °C (–31 °F to 158 °F)

Relative humidity 0 % to 80 % non-condensing 0 % to 80 % non-condensing 0 % to 80 % non-condensing

Notes

1. At 1310 nm (unless otherwise specified) with an FC/non-angled connector

and a warmup time of 20 minutes (30 minutes for PM-16X3W), followed by

an offset nulling.

2. From 0 °C to 30 °C.

3. From 18 °C to 32 °C.

4. At 23 °C ± 1 °C with an FOA-322 connector adapter, between 1000 nm

and 1650 nm. Add 1 % to uncertainty below 1000 nm and 3 % over 1650 nm.

5. At 23 °C ± 1 °C with an FOA-322 connector adapter, between 1000 nm

and 1640 nm. Add 1 % to uncertainty below 1000 nm and 6 % over 1640 nm.

6. Averaged measurement at constant temperature in 0 °C to 40 °C range.

7. Averaging time 0.25 s, observation time 50 s at 23 °C ± 1 °C, from 1200 nm

to 1640 nm.

8. Bandwidth corresponds to each electrical scale from the lowest to the highest gain.

9. Measured in 0 °C to 40 °C range.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 110 111

Comentarios a estos manuales

Sin comentarios

Exfo PM-1100 Optical Power Meter Manual de usuario Pagina 75

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Exfo PM-1100 Optical Power Meter