Exfo FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 Manual de usuario descargar pdf (Pagina 224)

Maintenance

218 FTB-5230S/-OCA

Cleaning EUI Connectors

To clean EUI connectors:

1. Remove the EUI from the instrument to expose the connector

baseplate and ferrule.

2. Moisten a 2.5 mm cleaning tip with one drop of isopropyl alcohol

(alcohol may leave traces if used abundantly).

3. Slowly insert the cleaning tip into the EUI adapter until it comes out on

the other side (a slow clockwise rotating movement may help).

4. Gently turn the cleaning tip one full turn, then continue to turn as you

withdraw it.

5. Repeat steps 3 to 4 with a dry cleaning tip.

Note: Make sure you don’t touch the soft end of the cleaning tip.

WARNING

Looking into the optical connector while the light source is active

WILL result in permanent eye damage. EXFO strongly recommends

to TURN OFF the unit before proceeding with the cleaning

procedure.

Push

Turn

Pull

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 250 251

Sin comentarios

Exfo FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 Manual de usuario Pagina 224