Exfo FLS-5800 CD/PMD Analyzer Source Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Setting CD/PMD Analyzer Source Parameters
CD/PMD Analyzer Source 13
Setting the Backlight
Setting the Backlight
In certain circumstances, you might want to deactivate the display
backlight.
To deactivate the backlight:
1. Press the Setup key.
2. Use the up/down or left/right arrow keys to select Backlight (the item
will be displayed in reverse video).
3. Press ENTER to access the Backlight edit box.
4. Use the up/down arrow keys until the backlight value changes to OFF.
5. Press ENTER to confirm the new backlight setting.
To reactivate the backlight:
³ Standing very close to the screen to see the information displayed,
repeat steps 1 to 4 above (but set the backlight value to ON).
OR
³ Reset the unit to the default factory parameters (see You may want to
reset the CD/PMD Analyzer Source parameters to their original values.
on page 15).
Setting the Contrast
To modify the contrast:
1. Press the Setup key.
2. Use the up/down or left/right arrow keys to select Contrast (item will
appear in reverse video).
3. Press ENTER to access the Contrast edit box.
4. Use the up/down arrow keys to adjust the contrast as required.
5. Press ENTER to confirm the contrast adjustment.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 97 98

Comentarios a estos manuales

Sin comentarios