Exfo FPM-600 Power Meter Manual de usuario descargar pdf (Pagina 47)

Saving and Recalling Power/Loss Values

Power Meter/Light Source/Optical Loss Test Set 41

Saving, Recalling and Deleting Data

To recall saved data:

1. From normal operating mode, hold down

for a few seconds. The Recall indicator

is displayed with the cable name, then the

last saved value and its fiber ID.

2. When fiber ID is displayed, hold down

for a few seconds to return to the cable

name list. Select the cable in which you want to recall saved data by

using and to move forward or backward. The last saved

value in the selected cable and its fiber ID will be displayed after 3

seconds.

3. View values you want by using and to move forward or

backward in saved data. You can also change the units by pressing

4. Press to return to normal mode.

IMPORTANT

When the power meter is connected to the fiber or DUT, you must

wait until at least one loss measurement is displayed on the power

meter before pressing the button.

Once you have pressed the button, you must wait until the Store

indicator on-screen disappears before disconnecting the power

meter or light source to test the next fiber or DUT.

When in Auto-Switching mode, it is important NOT to disconnect

the power meter or light source from the fiber or DUT before the

storage sequence is complete. The storage sequence is complete

when the Store indicator turns off.

The storage process will save the upcoming values, not the

preceding ones.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 78 79

Sin comentarios

Exfo FPM-600 Power Meter Manual de usuario Pagina 47