Exfo VDSL2 Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 275
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
VF Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 97
Send Tone (TX)
Send Tone (TX)
The VF Send Tone (TX) pane allows
you to configure and transmit a tone to
a downstream device in the loop.
Each parameter and button on the
pane is described below.
³ Frequency (Hz) is the frequency
of the transmitting tone. Specify a
value between 200 and 20000.
Default value is 1004 Hz.
³ Level (dBm) is the tone level. Specify a value between -20 and 10.
³ Apply is used to confirm any changes to parameter values which can
be changed while the test is running.
To start/stop the test:
1. Press the up/down arrow keys to highlight the desired test parameter.
2. Press to specify a value.
3. Press the left/right arrow keys to erase the existing value, and then use
the alphanumeric keypad to enter a value. To cancel the entry, press
.
4. Press to accept the value.
5. Select other parameters as required.
6. Press to start/stop the test.
Test results are displayed on the screen as they are completed.
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 274 275

Comentarios a estos manuales

Sin comentarios