Exfo VDSL2 Manual de usuario descargar pdf (Pagina 38)

Configure Tests for xDSL/IP Triple-Play Verification

32 AXS-200/630

Configure Line Tests

ATM LoopBack

The ATMLB tab allows you to configure the parameters to verify the

connection between the DSLAM and the ATM core; that the customer is

properly provisioned up to the point of the ATM switch based on

ATM

F5 OAM (operation, administration, and maintenance) loopback

functionality.

The available parameters are the

following:

³ VPI is a value ranging from

through 255 for the virtual path

identifier (VPI) of the ATM

connection.

³ VCI is a value ranging from

through 63535 for the virtual

circuit identifier (VCI) of the ATM

connection.

³ Cell Type initiates either End to End or Segment loopbacks.

³ Mode lists the levels of OAM testing dedicated to the ATM layer. The

values are either F4 for testing the virtual path level or F5 for testing the

virtual channel level.

To select the ATM loopback parameters to configure:

1. Press the up/down arrows to select the desired parameter.

2. Press to open the list or modify the parameter.

3. In the list, press the up/down arrows to select the function or mode.

Use the alphanumeric keypad to enter the value you want to specify.

4. Press to confirm the selection.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 123 124

Sin comentarios

Exfo VDSL2 Manual de usuario Pagina 38